Pipe Welding Clamps

Approx. Rs 3.6 Lakh / UnitGet Latest Price

We have marked a distinct position in the domain by manufacturing and supplying Internal Line up Clamp with Gas Purge System. This internal line up clamp comes with gas purge system. It is used for aligning of total nickel-based pipes, clad pipe & stainless steel pipe prior to welding. Normally used for CRA pipe for offshore pipeline project, this clamp is highly demanded in the market.

This Internal Pipe Clamp with Gas Purge System is for total nickel-based pipe. It can align pipes quickly, forming an inert gas protection inside. It is equipped with an oxygen content measurement device, which can monitor the oxygen real time to ensure the welding quality. Power source of the internal clamp is compressed air. The protective gas inflation is direct, allowing back gas protection. Inflation can reduce oxygen content under 100 PPM within 2-5 minutes. The protection gas vent includes wind & sand proof device. 

Features:

• Equipped with oxygen meter.
• Easy to install and use.
• Longer working life.
• Quick line up for continuous welding of pipe.
• One specific wall thickness.
• Minimum weight, maximum durability.

Additional Information:

Approx. Rs 3.2 Lakh / PieceGet Latest Price

SPM ENGINEERS is a topmost manufacturer of DSS pipe clamp with purging arrangement hydraulic (Internal). We are offering different sizes of clamps for your valuable pipeline projects starting with 14” diameter.

The Purge Preventing Systems in the range manufactured by SPM ENGINEERS are designed around the principle of using 2 silicon purging tubes to create a seal on either side of the weld, just far enough away from the weld not to be affected by heat but close enough to the joint to provide the fastest weld purge time. Once ready to start purging, the system is inserted into the bore of the pipe using a reach rod to center the system to the weld gap.

When the gas flow is started, the silicon purging tube inflates and upon reaching the pre-set pressure, the valve releases the gas gently into the weld chamber to purge the interspace without turbulence. The Oxygen is removed from the weld chamber through the integral exhaust outline provided in the system. Used in conjunction with Oxygen Monitors to indicate when the required low level of oxygen has been reached, welding can then commence, with the inert gas enabling the welder to produce an even oxidation-free penetration weld bead. Afterward, the silicon purging tubes are deflated simply by operating the valve in the panel box and taken back the preventing system easily.

Our offered each clamp is machined for a specific pipe internal diameter and comes with a standard 12-meter reach rod, hook, and handle.

Further, we are making standard size DSS clamp with Purging Arrangement Hydraulic (Internal)

12” to 48” and upper size will be available on request as per the client’s specification and requirement.

Additional Information:

Approx. Rs 19,500 / PieceGet Latest Price

Additional Information:

Approx. Rs 20,000 / UnitGet Latest Price

SPM ENGINEERS Cage type Pipe Clamp Manual is precision Bored for Perfect Roundness and Pipe Sizing. We supply you Cage type Clamps with various size that fits to your needs. Our Cage type Clamps are ruggedly built of quality steel to last longer. Additional sizes are available upon request.  All Cage type Clamps are precision fitted to the proper specification to ensure proper alignment and quick clamping with a convenient hand lever for quick line-up the pipe.

FEATURES:

• Very easy to use.
• Manual Operation.
• Will not back off when weld is being made.
• Available in sizes 3” to 64”.
• All Manual No tack Cage clamp have an arched bar design which allows for 360^o continuous welding without removing of clamp.
• Precision built for accurate alignment and long field life.
• Available with stainless steel contact points for DSS Pipes up on request.

Additional Information:

Approx. Rs 60,000 / UnitGet Latest Price

Hydraulic External Line Up Clamp is easy for alignment and very easy to use. All Clamps are precision fitted to the proper specification to ensure proper alignment and quick clamping with convenient hydraulic hand pump and jack for quick line up for the pipe.

The clamp pulls down tight with a hydraulic jack for effortless pipe alignment. The hydraulic closure mechanism on this cage clamp also enables rapid release after welding.

Features:

• Hinged to open wide for easy mounting, use, or removal.
• Circle secured by single master pin.
• Tighten with hydraulic jack to get more strength.
• Available in standard and no-tack (arched bar model).
• All hydraulic cage type pipe clamps have a flat cross bar design for more strength.
• Cage type Clamp Hydraulic is requires for each diameter of pipe separately.
• Hydraulic system operated with high pressure hand pump, no electricity / fuel required.

Additional Information:

Approx. Rs 60,000 / UnitGet Latest Price

• Accurately aligns with minutes
• Hinged to open wide for easy mounting, use, or removal
• Circle secured by the single master pin
• Tighten with hydraulic jack to get more strength

Additional Information:

Approx. Rs 75,000 / PieceGet Latest Price

SPM ENGINEERS is a leading manufacturer and supplier of cage-type pipe clamp hydraulic. Our offered Hydraulic clamps are engineered under a perfect manufacturing environment. All bridges and rings are made of high-quality steel and are specially designed for welding thick-walled pipes.

We provide our clients with a specified range of hydraulic Clamps at competitive prices. Available in various sizes and dimensions. We offer fittings that confirm international standards and norms.

It is mostly applicable for 18” And Above pipe jointing operations.

SPM ENGINEERS offers a variety of Cage-type Pipe Clamp with Hydraulic operated for your projects in various sizes starting with 18”.

Additional Information:

Approx. Rs 12,000 / PieceGet Latest Price

Additional Information:

Approx. Rs 56,000 / PieceGet Latest Price

Hydraulic Cage Clamp is available for pipe sizes 18″ to 88” The clamp pulls down tight with a hydraulic jack for effortless pipe alignment. The hydraulic closure mechanism on this cage clamp also enables rapid release after welding.

FEATURES:

• Tighten with hydraulic Jack with heavy duty hydraulic hand pump
• easy to alignment and very easy to use
• Available size 18” to 88”
• All hydraulic Cage type Clamp are precision fitted to the proper specifications to ensure proper alignment and quick clamping with a convenient hydraulic jack for quick line-up of the pipes.
• All hydraulic standard Cage Clamps have a flat cross bar design for more strength.
• All hydraulic no-tack Clamps have an arched cross bar design which allows 360 degree continuous welding without clamp removal.

Additional Information:

Approx. Rs 25,000 / PieceGet Latest Price

Additional Information:

Approx. Rs 45,000 / NumberGet Latest Price

This type of pipeline equipment machines is usually used in certain yard where oil and gas pipeline are. The Manual Pipe Line Up Clamp is a machine which is built and used specifically for the line-up and centering of the oil and gas -pipeline, normally used under standard diameters. The clamp and the centering of the pipes are necessary for a good welding.

Features:

• Three shoes clamping
• Built for rugged use, easily maintained.

Additional Information:

Approx. Rs 20,000 / UnitGet Latest Price

SPM’s Manual Cage type Pipe Clamp is precision Bored for Perfect Roundness and Pipe Sizing. We supply you Cage type Clamps with various sizes that fits to your needs. Our Cage type Clamps are ruggedly built of quality steel to last longer. Additional sizes are available upon request. All Cage type Clamps are precision fitted to the proper specification to ensure proper alignment and quick clamping with a convenient hand lever for quick line-up the pipe.

Features:

• Very easy to use.
• Manual Operation.
• Will not back off when weld is being made.
• All Manual No tack Cage clamp have an arched bar design which allows for 360^o continuous welding without removing of clamp.
• Precision built for accurate alignment and long field life.
• Available with stainless steel contact points for DSS Pipes upon request

Additional Information:

Approx. Rs 40,000 / SetGet Latest Price

Features:

• Comes standard with carbon steel construction.
• Optional with copper or stainless steel.
• Choice of hard or soft wheels.
• Self-positioning and simple to use.
• Comes standard with 12 Mtrs. Reach Rod.
• Built for rugged use, easily maintained.
• Field proven design.
• One Clamp will work with various wall thickness.

Additional Information:

Approx. Rs 80,000 / NumberGet Latest Price

SPM ENGINEERS is the leading manufacturer of pipe joint internal clamp manual. Pipe joint internal clamp manual used in the definite yard where oil and gas pipeline is where require the line-up and centering of the oil and gas pipeline. Our pipe joint internal clamp manual is made from excellent quality raw material so this clamp has distinctive features like perfect dimension, rust-proof, sturdy construction, and high durability.

Our pipe joint internal clamp manual available in standard size 10” to 48” and we can be provided customization as per client need and specification. Pipe joint internal clamp manual operates on screw jack type mechanism.

Our pipe joint internal clamp used in an offshore and onshore pipeline project in the range of 10” to 48' diameter.

Additional Information:

Approx. Rs 90,000 / PieceGet Latest Price

The SPM ENGINEERS superior quality Manual Pipe Joint Internal Clamp are manufactured using high-grade iron and steel. These clamps have unique features of rust resistance, durability, sturdy construction and accurate dimensions. Designed to meet the customized specifications provided by the clients, our range operates on screw jack type mechanism in order to have adequate alignment.

 Features:

• Quick line-up for continuous welding of pipe.
• Complete with hook and handle.
• Full-round stringer beads eliminate costly 'tacking" and weld defects.
• Minimum weight, maximum durability.
• Screw jack type mechanism to have adequate alignment.
• Toggle action puts maximum power on pipe.
• Heavy duty Gear box puts more power on the pipe with less operator effort.

Additional Information:

Approx. Rs 65,000 / UnitGet Latest Price

Additional Information:

Approx. Rs 65,000 / UnitGet Latest Price

SPM ENGINEERS brings you high quality and reliability unparalleled Pipe joint Clamps. Each clamp machined for specific wall thickness and pipe O.D. Our Pipe joint Clamps are specialized for offshore work. SPM ENGINEERS designed Pipe joint Clamps for efficient operations. We have various models of Pipe joint Clamps to choose from.

Features:

• Quick Line-up for continuous welding of pipe
• Screw jack type mechanism to have adequate alignment
• Toggle action puts maximum power on pipe
• It is designed for all diameter and wall thickness of pipe
• Heavy duty Gear box puts more power on the pipe with less  operator effort
• Copper back-up for automatic welding also available upon request
• Pipe Joint Internal Clamps are available in 10” to 48”.

Additional Information:

Approx. Rs 75,000 / SetGet Latest Price

SPM ENGINEERS has produced Internal Hydraulic Pipe Alignment Clamp for pipe welding. Build on the prediction that hydraulic was the future "state of the art" in pipe-welding, SPM has created a unique range of clamps in close co-operation with customers around the Globe.

Features:

• Power unit required only motorize version
• Available with copper back-up
• Easy to install and operate

Additional Information:

Approx. Rs 80,000 / UnitGet Latest Price

SPM ENGINEERS brings you high quality and reliability Pipe Alignment Clamp. Each clamp machined for specific wall thickness and pipe O.D. Our Pipe Alignment Clamps are specialized for all Pipeline Project. SPM designed Pipe Alignment Clamp for efficient operations. We have various models of Pipe Alignment Clamp to choose from.

Features:

• Easy for alignment and very easy to use
• All Pipe Alignment Clamp Hydraulic (Inner) are precision fitted to the proper specification to ensure alignment and quick clamping with a convenient hand lever and hydraulic jack for quick line-up of the pipe
• Each Clamp requires for each diameter of pipe
• Bearings provided in the travelling wheels to move the clamp to next joint easily.

Additional Information:

Approx. Rs 3.5 Lakh / UnitGet Latest Price

SPM Internal Line up Clamp Pneumatic are extremely robust and built to special high standards to withstand pipeline spread operations. Clamps are adjustable for any wall thickness or size within the specified range—independently operated pneumatic heads allow the line-up of pipes with different wall thicknesses. When correctly used Internal Line up Clamp Pneumatic will not damage or "bell end" the pipe.

A "Pull type - travelled" Internal Line up Clamp Pneumatic is pulled to the next joint (manually). Internal Line up Clamp Pneumatic requires compressed air at 100-145 psi (7-10 bars). Maximum safe working pressure is 175 psi (12 bars).

Pull type Travelled units for pipe sizes 6" to 20”

FEATURES:

• Internal Line up Clamp Pneumatic covers a range of diameters and is adjustable for wall thicknesses within the specified range.
• According to pipe wall thickness, the Internal Line up Clamp Pneumatic is adjusted to the required setting by SPM.
• Internal Line up Clamp Pneumatic are specially developed and built to withstand pipeline spread operations.
• The Internal Line up Clamp Pneumatic requires compressed air pressure from a compressor.
• Alloy steel wheels provided with clamps for smooth travelling.
• It is ideal choice for construction of oil and natural gas pipeline.
• Independently operated Pneumatic heads allow the line-up of pipes with different wall thickness.
• Adequate line-up at the next joint is assured by a reserve air tank.
• Conversion kits for various pipe sizes are available upon request. 

Additional Information:

Approx. Rs 5.5 Lakh / PieceGet Latest Price

SPM Pipe Welding Pneumatic Clamp is extremely robust and built to special high standards to withstand pipeline spread operations. Clamps are adjustable for any wall thickness or size within the specified range—independently operated pneumatic jaws allow the line-up of pipes with different wall thicknesses. When correctly used pipe welding pneumatic clamp will not damage or “bell end” the pipe.

Pipe welding pneumatic clamp travels through the pipe to the next joint under its own power. Pipe welding pneumatic clamp requires compressed air at 100-145 psi (7-10 bars). The maximum safe working pressure is 175 psi (12 bars

Additional Information:

Approx. Rs 3.8 Lakh / PieceGet Latest Price

Banking on years of experience SPM ENGINEERS offers a wide range of Pipe Welding Pneumatic Clamp. Pipe Welding Pneumatic Clamp reliable a rapid, accurate alignment of two joints of pipe during the welding operation. Independently operated pneumatic heads allow the lineup of pipes with different wall thicknesses.

A “Pull type – traveled” Internal Line up Clamp Pneumatic is pulled to the next joint (manually). Pipe welding Pneumatic clamp requires compressed air at 100-145 psi (7-10 bars). The maximum safe working pressure is 175 psi (12 bars).

A Non-Self type traveled Pneumatic clamp for pipe sizes 6” To 20”.

Additional Information:

Approx. Rs 5.5 Lakh / UnitGet Latest Price

• Air tank provides sufficient air pressure for lining up incoming pipe joint.
• Adequate line-up at the next joint is assured by a reserve air tank.
• Alloy steel wheels provided with clamps for smooth travelling.
• Independently operated Pneumatic heads allow the line-up of pipes with different wall thickness.

Additional Information:

Approx. Rs 4 Lakh / UnitGet Latest Price

Internal Pneumatic Pipe Line-Up Clamp assures a rapid, accurate alignment of two joints of pipe during the welding operation. Front and rear heads operate independently to lock the clamp into position. Specially designed shoes on each head exert pressure uniformly around the inside circumference of the pipe to maintain necessary alignment. Each pipe welding pneumatic clamp is easily and quickly adjusted for different pipe wall thickness.

 In order to joint pipes on site, these must be centered. In order to weld pipes on site, these must be centered. Pipe Welding Pneumatic Clamps can be used in any terrain.

A "Pull type - travelled" Pipe welding pneumatic clamp is pulled to the next joint (manually). 

Features:

• Air tank furnish adequate air pressure for lining up incoming pipe joint.
• Conversion kits for various pipe sizes are available on request.
• Pipe Welding Pneumatic Clamp is adjusted to the required setting by SPM according to pipe wall thickness.
• Adequate line up at the next joint is assured by reserve air tank.
• Alloy steel wheels provided with clamps for smooth travelling.
• Pipe Welding Pneumatic Clamps are specially develop and built to withstand pipeline spread operations.

Approx. Rs 4 Lakh / UnitGet Latest Price

SPM Pneumatic Internal Line Up Clamp is extremely robust and built to special high standards to withstand pipeline spread operations. Clamps are adjustable for any wall thickness or size within the specified range—independently operated pneumatic jaws allow the line-up of pipes with different wall thicknesses. When correctly used pipe welding pneumatic clamp will not damage or “bell end” the pipe.

Features:

• Pipe Welding Pneumatic Clamp covers a range of diameters and is adjustable for wall thicknesses within the specific range.
• Pneumatic Pipe Welding Clamp is adjusted to the require setting by SPM according to the pipe wall thickness.
• Pneumatic Pipe welding Clamp requires flattens air pressure from a compressor.
• SPM Pneumatic Pipe Welding Clamp is exemplary choice for construction of oil and natural gas pipeline.
• Separately operated Pneumatic jaws allow the line of pipes with different wall thicknesses.
• Adequate line up at the next joints is assured by a reserve air tank.
• The Internal Line up Clamp Pneumatic works inside the pipe. Roller-type actuating jaws hold the pipe ends to assure an adequate alignment of two pipe joints for external welding.

Additional Information:

Approx. Rs 5.5 Lakh / UnitGet Latest Price

SPM Pipe Welding Self Pneumatic Clamp is extremely robust and built to special high standards to withstand pipeline spread operations. Clamps are adjustable for any wall thickness or size within the specified range-independently operated pneumatic jaws allow the line-up of pipes with different wall thicknesses. When correctly used pipe welding pneumatic clamp will not damage or "bell end" the pipe.

Features: 

• An Internal Line up Clamp Pneumatic (Self) covers a range of diameters and is adjustable for wall thicknesses within the specified range.
• According to pipe wall thickness, the Internal Line up Clamp Pneumatic (Self) is adjusted to the required setting by SPM.
• The Internal Line up Clamp Pneumatic (Self) works inside the pipe. Roller-type actuating jaws hold the pipe ends to assure an adequate alignment of two pipe joints for external welding.
• Internal Line up Clamp Pneumatic (Self) are specially developed and built to withstand pipeline spread operations.
• The Internal Line up Clamp Pneumatic (Self) requires compressed air pressure from a compressor.
• Alloy steel wheels provided with clamps for smooth travelling.
• It is ideal choice for construction of oil and natural gas pipeline.
• Independently operated Pneumatic jaws allow the line-up of pipes with different wall thickness.
• Adequate line-up at the next joint is assured by a reserve air tank.
• Conversion kits for various pipe sizes are available upon request.

Additional Information:

Approx. Rs 60,000 / SetGet Latest Price

Additional Information:

Approx. Rs 50,000 / PieceGet Latest Price

Additional Information:

Approx. Rs 20,000 / UnitGet Latest Price

Additional Information:

Approx. Rs 12 Lakh / SetGet Latest Price

Additional Information:

Approx. Rs 1.15 Lakh / SetGet Latest Price

Additional Information:

Approx. Rs 70,000 / UnitGet Latest Price

The SPM ENGINEERS superior quality Manual Pipe Joint Internal Clamp are manufactured using high-grade iron and steel. These clamps have unique features of rust resistance, durability, sturdy construction and accurate dimensions. Designed to meet the customized specifications provided by the clients, our range operates on screw jack type mechanism in order to have adequate alignment.

 Features:

• Quick line-up for continuous welding of pipe.
• Complete with hook and handle.
• Full-round stringer beads eliminate costly 'tacking" and weld defects.
• Minimum weight, maximum durability.
• Screw jack type mechanism to have adequate alignment.
• Toggle action puts maximum power on pipe.
• Heavy duty Gear box puts more power on the pipe with less operator effort.

Additional Information:

Approx. Rs 80,000 / SetGet Latest Price

Features:

• Pipe sizes 10” to 48”
• Quick line-up for continuous welding of pipe.
• Complete with hook and handle.
• Full-round stringer beads eliminate costly 'tacking" and weld defects.
• Minimum weight, maximum durability.
• Screw jack type mechanism to have adequate alignment.
• Toggle action puts maximum power on pipe.
• Heavy duty Gear box puts more power on the pipe with less operator effort.
• Copper back-up for automatic welding also available upon request.
• Also available with Purging Set-up for DSS pipe upon request.

Additional Information:

Approx. Rs 65,000 / SetGet Latest Price

• Simple, quick and easy to use.
• For pipes from 3” to 48”.
• Will not back off while weld is being made.
• Mechanism is enclosed to eliminate dirt or mud.
• Clamps available in Heavy Duty for higher wall thickness upon request.
• Available with stainless steel contact points for DSS Pipes.
• All Manual No tack Cage clamp have an arched bar design which allows for 360o continuous welding without removing of clamp.
• Hinged to open wide for easy mounting, use, or removal
• Cage type Clamp manual is requires for each diameter of pipe.

Approx. Rs 20,000 / PieceGet Latest Price

Additional Information:

Approx. Rs 25,000 / PieceGet Latest Price

Additional Information:

Approx. Rs 10,000 / PieceGet Latest Price

Additional Information:

Approx. Rs 25,000 / PieceGet Latest Price

Additional Information:

Approx. Rs 60,000 / UnitGet Latest Price

SPM ENGINEERS has produced Internal Hydraulic Pipe Alignment Clamp for pipe welding. Build on the prediction that hydraulic was the future "state of the art" in pipe-welding, SPM has created a unique range of clamps in close co-operation with customers around the Globe.

Features:

• Power unit required only motorize version
• Available with copper back-up
• Easy to install and operate

Additional Information: