External And Manual Pipe Clamp

Approx. Rs 20,000 / UnitGet Latest Price

Featuring an ergonomic design, this pipeline welding clamp is made with the operator safety and stability of the pipe in mind. All SPM ENGINEERS clamps are constructed from solid materials for strength and durability and are built to last and acutely align pipe for years.

Additional Information:

Approx. Rs 12,000 / PieceGet Latest Price

Additional Information:

Approx. Rs 30,000 / PieceGet Latest Price

Additional Information:

Approx. Rs 19,999 / PieceGet Latest Price

SPM ENGINEERS Ratchet Type Pipe Clamp-Manual is built from the ground up with a focus on speed and adaptability. Our clamp is simple, quick and easy to use. Ratchet Type Pipe Clamp-manual is screw type and operated reversible ratchet wrench supplied with each clamp.

Featuring an ergonomic design, this pipeline welding clamp is made with the operator safety and stability of the pipe in mind. All SPM ENGINEERS clamps are constructed from solid materials for strength and durability and are built to last and acutely align pipe for years.

Ratchet Cage Type Pipe Clamp provides the extra force needed to align large pipe diameters. The ratchet clamp is available for 14” And Above pipe.

Features:

• For pipe sizes from 14” And Above.
• Screw type clamp with reversible ratchet.
• High clamping, even pressure for maximum alignment.
• Quick align pipes easily and fast.
• Crossbars options are flat (tack) or arched (no tack                 type).
•  Each clamp fits a specific pipe diameter.
•  Left and right thread provides fast alignment.

Additional Information:

Approx. Rs 28,000 / PieceGet Latest Price

Additional Information:

Approx. Rs 60,000 / PieceGet Latest Price

Additional Information:

Approx. Rs 57,000 / PieceGet Latest Price

Additional Information:

Approx. Rs 20,000 / PieceGet Latest Price

SPM’s Manual Cage type Pipe Clamp is precision Bored for Perfect Roundness and Pipe Sizing. We supply you Cage type Clamps with various sizes that fits to your needs. Our Cage type Clamps are ruggedly built of quality steel to last longer. Additional sizes are available upon request. All Cage type Clamps are precision fitted to the proper specification to ensure proper alignment and quick clamping with a convenient hand lever for quick line-up the pipe.

Features:

• Very easy to use.
• Manual Operation.
• Will not back off when weld is being made.
• All Manual No tack Cage clamp have an arched bar design which allows for 360^o continuous welding without removing of clamp.
• Precision built for accurate alignment and long field life.
• Available with stainless steel contact points for DSS Pipes upon request

Additional Information:

Approx. Rs 70,000 / PieceGet Latest Price

Additional Information:

Approx. Rs 80,000 / PieceGet Latest Price

Features:

• Large tightening force.
• Only workable for one single size pipe.
• High efficiency (no needs to do adjustment).
• Matching accuracy: unfitness of butt joint≤1.5mm.
• All hydraulic no-tack Clamps have an arched cross bar design which allows 360 degree continuous welding without clamp removal.
• Hydraulic system operated with hand pump, no electricity / fuel required.
• Accurately aligns in minutes.

Additional Information:

Approx. Rs 9.8 Lakh / SetGet Latest Price

Additional Information:

Approx. Rs 30,000 / SetGet Latest Price

SPM ENGEERS is a topmost manufacturer of DSS pipe clamp with purging arrangement hydraulic (Internal). We are offering different sizes of clamps for your valuable pipeline projects starting with 14” diameter.

The Purge Preventing Systems in the range manufactured by SPM ENGINEERS are designed around the principle of using 2 silicon purging tubes to create a seal on either side of the weld, just far enough away from the weld not to be affected by heat but close enough to the joint to provide the fastest weld purge time. Once ready to start purging, the system is inserted into the bore of the pipe using a reach rod to center the system to the weld gap.

When the gas flow is started, the silicon purging tube inflates and upon reaching the pre-set pressure, the valve releases the gas gently into the weld chamber to purge the interspace without turbulence. The Oxygen is removed from the weld chamber through the integral exhaust outline provided in the system. Used in conjunction with Oxygen Monitors to indicate when the required low level of oxygen has been reached, welding can then commence, with the inert gas enabling the welder to produce an even oxidation-free penetration weld bead. Afterward, the silicon purging tubes are deflated simply by operating the valve in the panel box and taken back the preventing system easily.

Our offered each clamp is machined for a specific pipe internal diameter and comes with a standard 12-meter reach rod, hook, and handle.

Further, we are making standard size DSS clamp with Purging Arrangement Hydraulic (Internal)

12” and Above and  upper size will be available on request as per the client’s specification and requirement.

Additional Information:

Approx. Rs 17,000 / PIECEGet Latest Price

Additional Information:

Product Price :Get Latest Price

SPM ENGINEERS is a topmost manufacturer of DSS pipe clamp with purging arrangement hydraulic (Internal). We are offering different sizes of clamps for your valuable pipeline projects starting with 14” diameter.

The Purge Preventing Systems in the range manufactured by SPM ENGINEERS are designed around the principle of using 2 silicon purging tubes to create a seal on either side of the weld, just far enough away from the weld not to be affected by heat but close enough to the joint to provide the fastest weld purge time. Once ready to start purging, the system is inserted into the bore of the pipe using a reach rod to center the system to the weld gap.

When the gas flow is started, the silicon purging tube inflates and upon reaching the pre-set pressure, the valve releases the gas gently into the weld chamber to purge the interspace without turbulence. The Oxygen is removed from the weld chamber through the integral exhaust outline provided in the system. Used in conjunction with Oxygen Monitors to indicate when the required low level of oxygen has been reached, welding can then commence, with the inert gas enabling the welder to produce an even oxidation-free penetration weld bead. Afterward, the silicon purging tubes are deflated simply by operating the valve in the panel box and taken back the preventing system easily.

Our offered each clamp is machined for a specific pipe internal diameter and comes with a standard 12-meter reach rod, hook, and handle.

Further, we are making standard size DSS clamp with Purging Arrangement Hydraulic (Internal)

12” to 48” and upper size will be available on request as per the client’s specification and requirement.

Additional Information:

Approx. Rs 1.1 Lakh / UnitGet Latest Price

Additional Information:

Approx. Rs 35,000 / UnitGet Latest Price

This type of pipeline equipment machines is usually used in certain yard where oil and gas pipeline are. The Manual Pipe Line Up Clamp is a machine which is built and used specifically for the line-up and centering of the oil and gas -pipeline, normally used under standard diameters. The clamp and the centering of the pipes are necessary for a good welding.

Features:

• Three shoes clamping.
• Built for rugged use, easily maintained.

Additional Information:

Approx. Rs 3.6 Lakh / SetGet Latest Price

We have marked a distinct position in the domain by manufacturing and supplying Internal Line up Clamp with Gas Purge System. This internal line up clamp comes with gas purge system. It is used for aligning of total nickel-based pipes, clad pipe & stainless steel pipe prior to welding. Normally used for CRA pipe for offshore pipeline project, this clamp is highly demanded in the market.

This Internal Pipe Clamp with Gas Purge System is for total nickel-based pipe. It can align pipes quickly, forming an inert gas protection inside. It is equipped with an oxygen content measurement device, which can monitor the oxygen real time to ensure the welding quality. Power source of the internal clamp is compressed air. The protective gas inflation is direct, allowing back gas protection. Inflation can reduce oxygen content under 100 PPM within 2-5 minutes. The protection gas vent includes wind & sand proof device. 

Features:

• Equipped with oxygen meter.
• Easy to install and use.
• Longer working life.
• Quick line up for continuous welding of pipe.
• One specific wall thickness.
• Minimum weight, maximum durability.

Additional Information:

Approx. Rs 65,000 / PieceGet Latest Price

Features:

• The clamp can be arranged with stainless steel pads for work with stainless steel pipes.
• Toggle action puts maximum power on pipe alignment
• Available with copper back-up upon request
• Easy to use and economical option for alignment of pipe
• This clamp will be operated by manually, so that No Electricity or Fuel required
• Our Pipe Joint Internal Clamp work inside the pipe to align two pipe joints for external welding in 360 degree without any disturbance

Additional Information:

Approx. Rs 52,000 / PieceGet Latest Price

Additional Information:

Approx. Rs 50,000 / PieceGet Latest Price

Additional Information:

Approx. Rs 40,000 / PieceGet Latest Price

Features:

• Comes standard with carbon steel construction.
• Optional with copper or stainless steel.
• Choice of hard or soft wheels.
• Self-positioning and simple to use.
• Comes standard with 12 Mtrs. Reach Rod
• Built for rugged use, easily maintained.
• Field proven design.
• One Clamp will work with various wall thickness.
• Available from sizes 6" & 8" Pipes.

Additional Information:

Approx. Rs 55,000 / PieceGet Latest Price

SPM ENGINEERS is a leading manufacturer and supplier of cage-type pipe clamp hydraulic. Our offered Hydraulic clamps are engineered under a perfect manufacturing environment. All bridges and rings are made of high-quality steel and are specially designed for welding thick-walled pipes.

We provide our clients with a specified range of hydraulic Clamps at competitive prices. Available in various sizes and dimensions. We offer fittings that confirm international standards and norms.

It is mostly applicable for 18” to 88” pipe jointing operations.

SPM ENGINEER offers a variety of Cage-type Pipe Clamp with Hydraulic operated for your projects in various sizes starting with 18”.

Additional Information:

Approx. Rs 60,000 / PieceGet Latest Price

SPM ENGINEERS is the leading manufacturer of pipe joint internal clamp manual. Pipe joint internal clamp manual used in the definite yard where oil and gas pipeline is where require the line-up and centering of the oil and gas pipeline. Our pipe joint internal clamp manual is made from excellent quality raw material so this clamp has distinctive features like perfect dimension, rust-proof, sturdy construction, and high durability.

Our pipe joint internal clamp manual available in standard size 10” to 48” and we can be provided customization as per client need and specification. Pipe joint internal clamp manual operates on screw jack type mechanism.

Our pipe joint internal clamp used in an offshore and onshore pipeline project in the range of 10” to 48” diameter.

Additional Information:

Approx. Rs 80,000 / UnitGet Latest Price

SPM ENGINEERS brings you high quality and reliability Pipe Alignment Clamp. Each clamp machined for specific wall thickness and pipe O.D. Our Pipe Alignment Clamps are specialized for all Pipeline Project. SPM designed Pipe Alignment Clamp for efficient operations. We have various models of Pipe Alignment Clamp to choose from.

Features:

• Easy for alignment and very easy to use.
• All Pipe Alignment Clamp Hydraulic (Inner) are precision fitted to the proper specification to ensure alignment and quick clamping with a convenient hand lever and hydraulic jack for quick line-up of the pipe.
• Each Clamp requires for each diameter of pipe.
• Bearings provided in the travelling wheels to move the clamp to next joint easily.

Additional Information:

Approx. Rs 60,000 / UnitGet Latest Price

SPM ENGINEERS is leading manufacturer and supplier of Cage Type Hydraulic Pipe Clamp. Our offered Hydraulic clamps are engineered under perfection manufacturing environment.

We provide our clients with specified range of hydraulic Clamps at competitive prices. Available in varies sizes and dimension. We offer fittings that confirm to international standard and norms.

Features:

• Tighten with hydraulic Jack
• Easy to alignment and very easy to use
• Available in standard and no-tack (arched bar model)
• All hydraulic Cage type Clamp are precision fitted to the proper specifications to ensure proper alignment and quick clamping with a convenient hand lever and hydraulic jack for quick line-up of the pipes.
• High efficiency (no needs to do adjustment).
• Hydraulic system operated with hand pump, no electricity / fuel required
• Accurately aligns in minutes.

Additional Information:

Approx. Rs 80,000 / SetGet Latest Price

SPM ENGINEERS Alignment clamps are custom-built, offering a range of solutions for accurate internal alignment. These internal clamps are manufactured for precision and are field-proven to be tough and durable.

SPM ENGINEERS is a large pipe alignment clamp hydraulic that is built tough to withstand the harshest conditions. This large hydraulic alignment clamp leaves the gap unobstructed for a full stringer bead. Each clamp is machined for a specific pipe ID and comes standard with a 12-meter reach rod, hook and handle.

Additional Information:

Approx. Rs 12.5 Lakh / PieceGet Latest Price

Additional Information:

Approx. Rs 60,000 / SetGet Latest Price

• Accurately aligns with minutes
• Hinged to open wide for easy mounting, use, or removal
• Circle secured by the single master pin
• Tighten with hydraulic jack to get more strength
• Available from 16" and above pipes.

Additional Information:

Approx. Rs 30,000 / PieceGet Latest Price

Additional Information:

Approx. Rs 7.5 Lakh / SetGet Latest Price

Additional Information:

Approx. Rs 10,000 / PieceGet Latest Price

Additional Information: